Wave curtains in Dubai, made to measure
Wave curtains — also sold as S-fold or ripple fold — hang in one continuous, even S-shaped curve from end to end. No pinch at the top, no gathered bunching. The fabric is held at regular intervals by carriers running in a corded track, and it is that track which forms the wave and holds it.
Why wave suits a Dubai apartment
Wave stacks tighter than pinch pleat. Drawn back it sits further off the glass and covers less of it. On a floor-to-ceiling window that is the difference between a full view and a partly blocked one.
It also matches the interiors: new towers are handed over plain, and a traditional pinch pleat looks fussy against flat ceilings and square reveals. In a villa or classic interior the opposite is true, and pinch pleat is the better heading. See both in our curtains collection.
The track matters more than the fabric
Wave is not a fabric, and not a stitching technique. It is a track system. A true wave needs a corded wave track with carriers at a fixed spacing, and a heading tape matched to that spacing exactly.
Put wave-taped fabric onto an ordinary track and it looks right for about a week. Then the gliders drift and you get three deep folds at one end and a flat run at the other. Re-dressing will not fix it, because nothing is holding the spacing. The only repair is a new track.
So when you compare quotes, ask one question: is a corded wave track included, and at what spacing. If the answer is vague, the wave will not last.
Fabric weight decides whether the wave looks like anything
Wave needs weight and drape. A medium-weight fabric with body — a good linen blend, a soft weave, a lined cotton — falls into a full, rounded curve.
Stiff fabric creases at the fold instead of curving through it. Very light unlined fabric goes shallow within days.
Ceiling or wall — and why the fixing outlives the fabric
Wave looks best fixed to the ceiling, running from the slab to the floor — something an eyelet curtain cannot do, since its rings need a pole. It makes the room taller and closes the gap where light spills over a wall-mounted track.
But in a Dubai tower the ceiling and window reveal are very often drywall rather than concrete. A wave track carries more load per bracket than a standard one, because every carrier is working. Fixed into drywall with the wrong anchor it sags within months, and once the track sags the wave goes uneven and stays uneven.
So we check the substrate at measurement, ceiling and wall both, and specify the anchor for what is there. That decides whether your wave still hangs straight in five years.
Wave with sheers layered behind
The most requested combination we install: a sheer wave on the front track for daylight, a blackout wave behind it for evening, both on one double bracket.
Wave suits sheer fabric particularly well: the folds stay soft and light passes evenly instead of banding. The honest limitation is the one on our sheers page: a sheer gives good privacy in daylight and almost none after dark with your lights on. Where the opposite tower is fifteen metres away, you need the second layer.
Motorised wave
Wave and motors suit each other: even spacing means smooth travel and a predictable stack.
One condition — the track must be specified as a motorised wave track from the start. You cannot reliably add a motor afterwards: the cord and the motor drive do the same job and fight each other. Decide it at the survey. Our motorised range covers the battery-versus-wired choice.
Keeping the wave sitting properly
A wave curtain is trained, not simply hung. On installation day we hand-dress every fold — setting each S by hand down the full drop — and tie the curtain loosely so the fabric learns the shape. We come back and untie it, free.
After that, draw it fully open or closed rather than halfway, and reset the folds by hand every few months.
How we work
A supervisor visits your home free, for about 45 minutes, with the fabric books. Every window measured twice. You receive one written price per finished window within 24 hours — fabric, wave tape, corded track, brackets, the correct fixings for your wall type, delivery, installation and hand-dressing, all inside that one number, nothing added later. Fitted on the date written into your contract, not a range, with a one-year mechanical and labour warranty.
The process is set out stage by stage in how it works, and what the year covers is on our guarantee. We measure and fit across all seven emirates.
Book your free measurement — no obligation.
Wave curtains — questions people ask first
Is wave the same thing as S-fold or ripple fold?
Yes — three names for one heading. If you have seen ripple fold on a quote, it means exactly this system. Compare the track and the carrier spacing rather than the name.
Can you put wave onto the track I already have?
Almost certainly not, and we would rather say so now than after you have paid. Wave needs a corded wave track with matched spacing; on a standard glider track the fold collapses within weeks. We will check yours at the free measurement.
Does wave use more fabric than pinch pleat?
Usually slightly less, because the fullness is lower — though that is not a reason to choose it. Choose it for the tighter stack and the cleaner line. Either way you get one price per finished window, so fabric quantity is our problem.
How much of the window stays covered when a wave curtain is open?
Less than the same window in pinch pleat, depending on drop, fabric and fullness. If clearing the glass matters, say so at the visit — we can run the track past the reveal so the stack sits on the wall.